Setting Stop Bits; Resetting Serial Port Options To Default; Setting Up The Ethernet Port - Siemens DCA Vantage Operator's Manual

3. Select a string length for the data bits:
• 8
• 7
The default value is 8.
4. To save the parity settings, select
The Serial Port menu displays.

Setting Stop Bits

1. Select
Stop Bits
2. Select a stop bit length:
• 1
• 2
The default value is 1.
3. To save the Stop Bits settings, select
The Serial Port menu displays.
4. Select to return to the Connectivity screen.
Back
5. Select Save to save the Connectivity settings.

Resetting Serial Port Options to Default

To reset the Serial Port options to the factory default settings:
1. At the Home screen, select
2. At System Settings, select
The Additional Settings menu displays.
3. At the Additional Settings menu, select
4. .
Select Serial
ASTM automatically selects.
5. Select
Configure
6. Select
Reset Defaults.

Setting up the Ethernet Port

Use the Ethernet Port menu to access the system setting to configure
Ethernet communication.
Use the Connectivity menu to enable and disable the Ethernet port. You can
access the screen to select different options for the Ethernet port.
The default setting for the Ethernet port is disabled.
NOTE:
1. At the Home screen, select
2. At the System Settings menu, select
34
Save
to set the number of stop bits.
System Settings
Additional Settings
.
System Settings
.
.
Save
.
.
Connectivity.
.
.
Additional Settings
DCA Vantage Operator's Guide