Results Of A Microalbumin/Creatinine Test - Siemens DCA Vantage Operator's Manual

Results of a Microalbumin/Creatinine Test

The system displays the following information for each patient Microalbumin/
Creatinine test.
You have to enable some of the features in System Settings for the
NOTE:
data to display.
Result
System Serial Number
Test Name
Sample Sequence Number
Transmission Status
Sample ID
Cartridge Lot Number
Test Cartridge Scan Date and Time
Patient ID
Patient Last Name
Patient First Name
Operator ID
Comment 1–8
Glomerular Filtration Rate (GFR)
and input data items
Albumin concentration results
Creatinine concentration results
72
Description
The serial number of the DCA Vantage
system.
The type of test, either Microalbumin/
Creatinine test or HbA
The sample sequence number.
The transmission status of the record.
The sample ID, if you entered one into
the system.
The lot number of the cartridge.
The date and time the test cartridge
was scanned.
The patient ID, if you entered one into
the system.
The last name of the patient, if you
entered one into the system.
The first name of the patient, if you
entered one into the system.
The Operator ID, if you entered one into
the system.
Any comments you entered regarding
the patient.
The GFR calculated measurement
based upon data input. The GFR is
displayed if calculated. Refer to
Configuring GFR for a Patient‚ page 81.
The albumin concentration results
display in units of mg/L.
The creatinine concentration results
display in mg/dL or mmol/L.
DCA Vantage Operator's Guide
test.
1c