Siemens DCA Vantage Operator's Manual page 22

Select . . . then . . .
Maintenance Reminders
General
Language
Time
Date
Sequence
Number
System Access
Test Lockout
Settings Wizard
Storage Mode
Save Data and
Settings
Delete Data
Restore Data
22
to . . .
view the Maintenance Task log. You can also
view and change the schedule for
maintenance tasks including changing the air
filter, cleaning the onboard barcode reader,
and cartridge compartment.
access screens that configure settings such
as language, time, and date that determine
what displays on the screen during testing.
set the display language. The languages are
sorted by country code.
set the current time and time format
(12 or 24 hours)
set the current date and date format.
specify whether or not the sequence number
resets daily, after 999 entries, or not reset.
select restricted, unrestricted, restricted plus,
or fully restricted access to the Recall and
System Settings features.
prevent a patient test from running when
there is a control test failure for the current
test type. The remove patient test lock
function locks out all patient testing and is
enabled and disabled from a remote
computer.
activate the wizard to run the next time the
system is powered on.
specify how patient and control tests are
deleted from the system; either automatic or
manual. Automatic deletion removes tests on
a first in-first out basis. Manual deletion
requires you to view and delete the tests.
save data and system settings to a USB
device.
remove the patient information that
associates the patient with the test results or
delete all patient and test results.
copy saved data from the USB device to the
DCA Vantage system. This overwrites any
current data on the system.
DCA Vantage Operator's Guide