Configuring Gfr For A Patient; Reports; Patient Test Reports; Report Components - Siemens DCA Vantage Operator's Manual

2. Select one of the following printer options:
• Onboard Printer
• External Printer
3. To print the patient test results, select
The patient test results print.

Configuring GFR for a Patient

The Glomerular Filtration Rate (GFR) describes the flow rate of filtered fluid
through the kidney. While running a patient test, the Sample Data Entry screen
displays. Use the GFR screen from the Sample Data Entry screen to enter
patient data including age, race, gender, and plasma creatine to calculate the
GFR for the patient.
1. At the Sample Data Entry screen, select
2. Enter the following data, which calculates the GFR for the patient:
a. Select the 2-digit age value for the patient.
The patient age range is between 18 and 70.
b. Select .
Next
c. Select the Gender of the patient.
d. Select .
Next
e. Select the Race of the patient.
f. Select .
Next
g. Select the Plasma Creatinine value.
h. Select .
Next
The GFR Calculation results screen displays the GFR value calculated
from the information entered at the GFR calculation screen.

Reports

Patient Test Reports

Patient Test Reports contain the results of HbA
tests that you generate during analysis and display at the results screen. You
can generate printed reports at analysis time and when print requests are
issued at Data Recall. You can also generate a printed report when you
perform a Demonstrated Patient Test.

Report Components

You can specify whether to print a long or a short report of the patient test
results. For a summary of the contents of patient test printed reports, see
Printed Reports‚ page 183. Regardless of the printed report type setting, the
system transmits the long-form report.
DCA Vantage Operator's Guide
.
Print
.
GFR
and Microalbumin/Creatinine
1c
81