Hba1C Test Results - Siemens DCA Vantage Operator's Manual

If you select the
Full Report
screen prints in the report.
If you select the
Short Report
prints in the report.
If you have enabled Auto Send, the system sends the test results
automatically to the LIS as soon as the test has completed. If you enter or
modify the patient demographic data, the system automatically saves the
changes and sends the test results to the LIS when you select
User Data screen.
HbA Test Results
1c
The system displays the following information for each patient HbA
You have to enable some of the data entries in System Settings. For more
information, see Setting Patient Data Entry‚ page 151.
Result
System Serial Number
Test Name
Sample Sequence Number
Transmission Status
Cartridge Lot Number
Test Cartridge Scan Date and Time
Sample ID
Patient ID
Patient Last Name
Patient First Name
Operator ID
Comment 1–8
60
option, all of the information that displays on the
option, a subset of the displayed information
Description
The serial number of the DCA Vantage
system.
The type of test, either Microalbumin/
Creatinine test or HbA
The sample sequence number.
The transmission status of the record.
The lot number of the cartridge.
The date and time the test cartridge was
scanned.
The sample ID, if you entered one into
the system.
The patient ID, if you entered one into
the system.
The last name of the patient, if you
entered one into the system.
The first name of the patient, if you
entered one into the system.
The Operator ID, if you entered one into
the system.
Any comments you entered regarding
the patient.
on the Edit
Next
test.
1c
test.
1c
DCA Vantage Operator's Guide