Setting The Subnet Mask; Entering A Domain Name Server; Entering The Default Gateway; Setting Up The Remote Computer - Siemens DCA Vantage Operator's Manual

Setting the Subnet Mask

Use the Subnet Mask screen to enter the subnet mask for the system.
1. At the Ethernet Port menu, select
2. Use the numeric keypad to enter the subnet mask.
3. To save the subnet mask, select
The Ethernet Port menu displays.

Entering a Domain Name Server

Use the Domain Name Server screen to enter the Domain Server Name for
the system.
1. At the Ethernet Port menu, select
2. Select
Domain Name Server
3. Use the alphanumeric keypad to enter the DNS.
4. To save the domain server name, select
The Ethernet Port menu displays.

Entering the Default Gateway

Use the Default Gateway screen to enter the default gateway for the system.
1. At the Ethernet Port menu, select
2. Use the numeric keypad to enter the default gateway.
3. To save the default gateway, select

Setting up the Remote Computer

Use the Remote Computer screen to enter the IP address or host name for the
remote computer. After you enter the IP address or host name, you can
communicate with the remote computer over the network.
1. At the Ethernet Port menu, select
2. Select
Remote Computer
3. Use the alphanumeric keypad to enter one of the following for the remote
computer:
• IP address
• host name
4. To save the remote computer, select

Setting the Port Number

Use the Port Number screen to enter the port number for the system.
1. At the Ethernet Port menu, select
36
Subnet Mask
.
Save
Domain Server Name
.
Save
Default Gateway
Save .
Remote Computer
.
.
Save
Port Number
.
.
.
.
.
.
DCA Vantage Operator's Guide