Scanning The Reagent Cartridge - Siemens DCA Vantage Operator's Manual

Scanning the Reagent Cartridge

1. Locate the dot (on the system) next to the barcode track.
2. Locate the barcode on the reagent cartridge.
3. Hold the reagent cartridge so that the barcode faces to the right.
4. Insert the reagent cartridge (above dot) into the barcode track.
5. Smoothly, slide the reagent cartridge down.
After a 1 second pause, a beep sounds to signal a successful scan.
NOTE:
If no beep sounds, repeat the procedure. If a beep repeatedly fails to
sound, refer to Troubleshooting‚ page 121.
1 Barcode Track Dot
Figure 21 Scanning the Reagent Cartridge
DCA Vantage Operator's Guide 69