Recall Menu - Siemens DCA Vantage Operator's Manual

Recall Menu

The Recall menu provides access to patient test results, control test results,
and calibration data.
At the Patient Tests screen, you can recall patient test data and export to a
USB device for backup.
To access the Recall menu, select Recall from the Home screen, and select
Patient Tests.
Table 1 Patient Tests
Select . . . then . . .
HbA1c View Last 10
Patient ID/Name
Date Range
Comment 1
Results/Range
Graph
DCA Vantage Operator's Guide
to . . .
see the last 10 results performed.
search by Patient ID or last name. You can
graph HbA results using the Patient ID
1c
search. The sort order is the reverse order in
which the tests were run. If there is not an
entry for a Patient ID or Last Name, the field
is blank. You also can delete test results from
this screen.
enter a Start and End Date to search patient
results for a specific time period.
search by the first comment of the up to 8
available comments. To perform a wildcard
search, use the percent (%) sign at the end
the entry.
Use the Set Lower Limit screen to set the
HbA search filter value when doing a
1c
search by result range. The Lower Search
Limit displays in the units of the primary
algorithm and cannot be set lower than the
following values:
• NGSP: 2.0%
• JDS: 1.7%
• mono-S: 1.0%
• IFCC: 3 mmol/mol
The search returns any test result that is
greater than the lower limit set.
display HbA results in graph format. After
1c
searching by patient ID, narrow the search
using a date range. The graph displays. You
can print the graph to the external printer.
19