Inserting Capillary Holder Into The Reagent Cartridge - Siemens DCA Vantage Operator's Manual

Inserting Capillary Holder into the Reagent Cartridge

1. Place the capillary holder in the correct position to insert it into the reagent
cartridge.
2. Insert the capillary holder into the reagent cartridge until the holder gently
snaps into place.
CAUTION
Avoid harsh insertion of capillary holder. Do not dislodge the sample
in the glass capillary because erroneous results may occur.
Figure 27
1 Capillary holder
Reagent cartridge
2
Figure 28 Inserting Capillary Holder into Reagent Cartridge
DCA Vantage Operator's Guide 89