Cleaning The Onboard Barcode Reader Window - Siemens DCA Vantage Operator's Manual

1. At the Home screen, select
A message displays asking if you want to shut down the system.
2. To shut down the system, select
The system begins shutting down.
3. After shutdown completes, turn the power switch to the off position.
Wait until shutdown completes before turning the power switch to the
NOTE:
off position.

Cleaning the Onboard Barcode Reader Window

WARNING
Turn the power off and disconnect the power cord before cleaning
the barcode window.
Materials Required:
• lint-free cloth
• water or ethanol
1. Clean the barcode window with a lint-free cloth dampened with water or
ethanol.
1 Onboard Barcode Reader
Figure 31 Cleaning the Onboard Barcode Reader Window
2. Connect the power cord after the barcode window is clean and dry.
96
.
Turn Off
.
Yes
DCA Vantage Operator's Guide