Start Up/Self Holding; Emergency Loop - Taski Swingo 455B Technical Manual

GTS
Picture 2: System overview 455B
6.1.3

Start up/Self holding

The machine is switched ON by pressing the ON/OFF button for 3 seconds and feeds the
power electronics with power. The power electronics get power and it enables the proc-
essor to start and go into the self holding. The power electronics stays on as long as:
•
•
•
•
6.1.4

Emergency loop

The machine has a separate emergency loop, which contains following elements:
•
•
5. March 2013
Copyright © 2013, Diversey Inc.
It is not switched OFF by the ON/OFF button.
The switch-off timer does not reach 5 minutes.
The charger is not connected to main.
The battery plug is connected to jack housing (350B:05/108,
455B:02/135).
Charger (internal switch).
Start up/Self holding.
Edition: V1.10/2013
Technical Manual
6-2