GTS
Picture 14: Articulation detail
•
•
Service
Lubricate the toothrockers with grease (07/131).
•
•
•
•
Remarks
For an easier mounting, position the holes of the sustaining disc and
toothed wheel in one line.
Make sure that the O-ring is correct positioned.
5. March 2013
Copyright © 2013, Diversey Inc.
Mount the retaining washer onto the axle
Mount the distance disc between the two toothrockers on the
axle.
Mount the eccentric shaft together with the end bolt of the
bowden cable according to chapter MOUNTING OF HANDLE
ADJUSTMENT LEVER.
Position the toothed wheel into the articulation.
Mount the two sustaining discs.
Mount the cover onto the articulation.
Edition: V1.10/2013
Technical Manual
5-13
Need help?
Do you have a question about the Swingo 455B and is the answer not in the manual?