Displaying Port Members Of Multicast Services; Figure 3-96 Static Multicast Router Port Configuration - SMC Networks 8708L2 - annexe 1 Management Manual

Tigerswitch 10g gigabit ethernet switch
Hide thumbs Also See for 8708L2 - annexe 1:
Table of Contents

Advertisement

C
ONFIGURING THE
Web – Click IGMP Snooping, Static Multicast Router Port Configuration.
Specify the interfaces attached to a multicast router, indicate the VLAN
which will forward all the corresponding multicast traffic, and then click
Add. After you have finished adding interfaces to the list, click Apply.

Figure 3-96 Static Multicast Router Port Configuration

CLI – This example configures port 1 as a multicast router port within
VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/14-276
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1
Console#

Displaying Port Members of Multicast Services

You can display the port members associated with a specified VLAN and
multicast service.
Command Attribute
VLAN ID – Selects the VLAN for which to display port members.
Multicast IP Address – The IP address for a specific multicast
service.
Multicast Group Port List – Shows the interfaces that have already
been assigned to the selected VLAN to propagate a specific multicast
service.
3-228
S
WITCH
Eth 1/1
Static
4-277

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc8708l2

Table of Contents