Removing The Optional Front Bezel; Installing The Optional Front Bezel - Dell EMC PowerEdge R940xa Installation And Service Manual

Removing the optional front bezel

Prerequisites
Follow the safety guidelines listed in
Steps
1. Unlock the bezel by using the bezel key.
2. Press the release button, and pull the left end of the bezel.
3. Unhook the right end, and remove the bezel.
Figure 19. Removing the optional front bezel with the LCD panel
Next steps
1. Replace the front bezel.

Installing the optional front bezel

Prerequisites
1. Follow the safety guidelines listed in
2. Locate and remove the bezel key.
NOTE: The bezel key is part of the optional front bezel.
Steps
1. Align and insert the right end of the bezel onto the system.
2. Press the release button and fit the left end of the bezel onto the system.
3. Lock the bezel using the key.
46 Installing and removing system components
Safety instructions.
Safety instructions.