Table of Contents
Advertisement
The PowerEdge R6525 system is a 1U rack server that supports:
TM
● Two AMD EPYC
7002 series processors
● 32 DIMM slots
● Two redundant AC or DC power supply units
● Up to 4 x 3.5-inch, 8 x 2.5-inch, or 10 x 2.5-inch SAS, SATA, or NVMe drives.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe
SSD User's Guide at
https://www.dell.com/support
Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and
Documents.
NOTE:
All instances of SAS, SATA drives, PCIe SSDs, and NVMe are referred to as drives in this document, unless specified
otherwise.
For more information about supported drives, see the
Topics:
•
Front view of the system
•
Rear view of the system
•
Inside the system
•
Locating the Express Service Code and Service Tag
•
System information label
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of the 10 x 2.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
8
System overview
Browse all Products > Data Center Infrastructure > Storage
www.dell.com/poweredgemanuals
Icon
Description
N/A
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
● Status LED: Enables you to identify any failed hardware
System overview
section.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
2
Advertisement
Table of Contents
