Dell EMC XC Core XC6515 system overview
The Dell EMC XC Core XC6515 system is a 1U server that supports:
•
One AMD EPYC 7002 series processor
•
Sixteen DIMM slots
•
Two redundant AC power supply units
•
Up to 4 x 3.5 inch, 8 x 2.5 inch SAS/SATA drives, 10 x 2.5-inch drives (with 8 SAS/SATA/ NVMe drives + 2 NVMe drives) or 10x 2.5-
inch NVMe drives only.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
SSD User's Guide at https://www.dell.com/support> Browse all Products > Data Center Infrastructure > Storage
Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documents.
NOTE:
All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
For more information about supported drives, see the
Topics:
•
Front view of the system
•
Rear view of the system
•
Inside the system
•
Locating your system service information
•
System information label
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
1. Left control panel
3. VGA port
5. Information tag
Table 1. Features available on the front of the system
Item
Ports, panels, and slots Icon
1
Left control panel
Drive specifications
2. Optical drive (optional)
4. Right control panel
6. Drive (4)
Description
N/A
Contains the system health, system ID, status LED, and the iDRAC
Quick Sync 2 (wireless) indicator.
•
section.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
Dell EMC XC Core XC6515 system overview
Dell Express Flash NVMe PCIe
3
15