A. Cp-Ctm80-2 Rio Module - Kontron CP6500-V User Manual

CP6500-V
A. CP-CTM80-2 RIO Module
A.1 Introduction
The CP-CTM80-2 rear I/O module is available for use with the CP6500-V 6U CompactPCI
board from Kontron Modular Computers. This rear I/O module provides comprehensive rear
I/O functionality. There are two different CP-CTM80-2 versions available, which have been de-
signed for use both in a PICMG 2.16 and a non-PICMG 2-16 environment.
Everything that can be routed through the front panel may also be routed through the rear I/O.
A particular advantage of the rear I/O capability is that there is no cabling on the CPU board,
which makes it much easier to remove the CPU in the rack.
The rear I/O is installed in the back of the system into the backplane connectors P3, P4 and P5
in line with the CPU board.
The following figure illustrates the basic board layout including the front panel. For further in-
formation regarding connector pinouts refer to the product's Quick Reference Card.
ID 28945, Rev. 01 © 2005 Kontron Modular Computers GmbH
CP-CTM80-2 RIO Module
Page A - 3