Debug Met - Cisco Catalyst 3550 Command Reference Manual

Appendix B Debug Commands

debug met

Use the debug met privileged EXEC command to debug the allocation, freeing, and updating of the
multicast expansion table (MET) entries. These entries are used by the hardware when forwarding
individual IP multicast and fallback-bridged packets to multiple output VLANs. Use the no form of this
command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines The undebug met command is the same as the no debug met command.
Related Commands Command
show debugging
78-11195-09
debug met
no debug met
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Catalyst 3550 Multilayer Switch Command Reference
debug met
B-23