Cisco Catalyst 3550 Command Reference Manual page 382

show sdm prefer
Examples
This is an example of output from the show sdm prefer command on a Gigabit Ethernet switch,
displaying the template currently in use.
Switch# show sdm prefer
The current template is default template.
The selected template optimizes the resources in
the switch to support this level of features for
16 routed interfaces and 1K VLANs.
number of unicast mac addresses:
number of igmp groups:
number of qos aces:
number of security aces:
number of unicast routes:
number of multicast routes:
This is an example of output from the show sdm prefer command on a Gigabit Ethernet switch when
the default template has the extended-match keyword applied for 144-bit Layer 3 TCAM support:
Switch# show sdm prefer
The current template is the default extended-match template
The selected template optimizes the resources in
the switch to support this level of features for
16 routed interfaces and 1K VLANs.
number of unicast mac addresses:
number of igmp groups:
number of qos aces:
number of security aces:
number of unicast routes:
number of multicast routes:
This is an example of output from the show sdm prefer access command on a Gigabit Ethernet switch,
displaying the access template characteristics:
Switch# show sdm prefer access
access template:
The selected template optimizes the resources in
the switch to support this level of features for
16 routed interfaces and 1K VLANs.
number of unicast mac addresses:
number of igmp groups:
number of qos aces:
number of security aces:
number of unicast routes:
number of multicast routes:
Related Commands Command
sdm prefer
Catalyst 3550 Multilayer Switch Command Reference
2-356
6K
6K
2K
2K
12K
6K
6K
6K
2K
2K
6K
6K
2K
8K
2K
4K
4K
8K
Description
Sets the SDM template to maximize feature resource utilization for QoS
classification and security ACEs, routing, or VLANs, or to the default
template, or to reformat memory space to support 144-bit Layer 3 TCAM.
Chapter 2 Cisco IOS Commands
78-11195-09