Access-List Hardware Program Nonblocking - Cisco Catalyst 3550 Command Reference Manual

access-list hardware program nonblocking

Related Commands Command
access-list {deny | permit}
action
configuration)
ip access-group
ip access-list
mac access-group
match (access-map
configuration)
show running-config |
include access-list hardware
vlan access-map
vlan filter
Catalyst 3550 Multilayer Switch Command Reference
2-4
Description
Configures a standard numbered ACL. For syntax information, select
Cisco IOS IP and IP Routing Command Reference for IOS
Release 12.1 > IP Addressing and Services > IP Services
Commands.
(access map Defines or modifies the action for the VLAN access map entry.
Applies an IP access list to a Layer 2 or Layer 3 interface.
Configures a named access list. For syntax information, select Cisco
IOS IP and IP Routing Command Reference for IOS Release 12.1
> IP Addressing and Services > IP Services Commands.
Applies a MAC access list to a Layer 2 interface.
Defines the match conditions for a VLAN map.
Displays the current operating configuration. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference
for Release 12.1 > Cisco IOS File Management Commands >
Configuration File Commands.
Creates a VLAN access map or enters access-map configuration mode.
Applies a VLAN map to one or more VLANs.
Chapter 2 Cisco IOS Commands
78-11195-09