Cisco Catalyst 3550 Command Reference Manual page 199

Chapter 2 Cisco IOS Commands
Examples
This example shows how to define the IP-precedence-to-DSCP map and map IP-precedence values 0 to
7 to DSCP values of 0, 10, 20, 30, 40, 50, 55, and 60:
Switch# configure terminal
Switch(config)# mls qos map ip-prec-dscp 0 10 20 30 40 50 55 60
This example shows how to define the policed-DSCP map. DSCP values 1, 2, 3, 4, 5, and 6 are marked
down to DSCP value 0. Marked DSCP values that not explicitly configured are not modified:
Switch# configure terminal
Switch(config)# mls qos map policed-dscp 1 2 3 4 5 6 to 0
This example shows how to define the DSCP-to-CoS map. DSCP values 20, 21, 22, 23, and 24 are
mapped to CoS 1. DSCP values 10, 11, 12, 13, 14, 15, 16, and 17 are mapped to CoS 0:
Switch# configure terminal
Switch(config)# mls qos map dscp-cos 20 21 22 23 24 to 1
Switch(config)# mls qos map dscp-cos 10 11 12 13 14 15 16 17 to 0
This example shows how to define the CoS-to-DSCP map. CoS values 0 to 7 are mapped to DSCP values
0, 5, 10, 15, 20, 25, 30, and 35:
Switch# configure terminal
Switch(config)# mls qos map cos-dscp 0 5 10 15 20 25 30 35
This example shows how to define the DSCP-to-DSCP-mutation map. All the entries that are not
explicitly configured are not modified (remain as specified in the null map):
Switch# configure terminal
Switch(config)# mls qos map dscp-mutation mutation1 1 2 3 4 5 6 7 to 10
Switch(config)# mls qos map dscp-mutation mutation1 8 9 10 11 12 13 to 10
Switch(config)# mls qos map dscp-mutation mutation1 20 21 22 to 20
Switch(config)# mls qos map dscp-mutation mutation1 0 31 32 33 34 to 30
You can verify your settings by entering the show mls qos maps privileged EXEC command.
Related Commands Command
mls qos dscp-mutation
show mls qos maps
78-11195-09
Description
Applies a DSCP-to-DSCP-mutation map to a DSCP-trusted port.
Displays quality of service (QoS) mapping information.
Catalyst 3550 Multilayer Switch Command Reference
mls qos map
2-173