Archive Upload-Sw - Cisco Catalyst 3550 Command Reference Manual

archive upload-sw

archive upload-sw
Use the archive upload-sw privileged EXEC command to upload an existing switch image to a server.
Syntax Description
/version version_string
destination-url
Defaults
Uploads the currently running image from the flash: file system.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The upload feature is available only if the HTML files associated with the Cluster Management Suite
(CMS) have been installed with the existing image.
The files are uploaded in this sequence: info, the Cisco IOS image, the HTML files, and info.ver. After
these files are uploaded, the software creates the tar file.
Image names are case sensitive.
Examples
This example shows how to upload the currently running image to a TFTP server at 172.20.140.2:
Switch# archive upload-sw tftp://172.20.140.2/test-image.tar
Catalyst 3550 Multilayer Switch Command Reference
2-12
archive upload-sw [/version version_string] destination-url
(Optional) Specify the specify version string of the image to be uploaded.
The destination URL alias for a local or network file system. These options
are supported:
•
•
•
•
The image-name.tar is the name of software image to be stored on the
server.
Modification
This command was first introduced.
The syntax for the local Flash file system:
flash:
The syntax for the File Transfer Protocol (FTP):
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the Trivial File Transfer Protocol (TFTP):
tftp:[[//location]/directory]/image-name.tar
Chapter 2 Cisco IOS Commands
78-11195-09