Debug L3Multicast - Cisco Catalyst 3550 Command Reference Manual

debug l3multicast

debug l3multicast
Use the debug l3multicast privileged EXEC command to debug the platform-specific Layer 3 IP
multicast manager software module, which maintains platform-specific data describing IP multicast
routes. Use the no form of this command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug l3multicast command is the same as the no debug l3multicast command.
Related Commands Command
show debugging
Catalyst 3550 Multilayer Switch Command Reference
B-18
debug l3multicast
no debug l3multicast
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Appendix B Debug Commands
78-11195-09