Debug Ip Igmp Filter - Cisco Catalyst 3550 Command Reference Manual

debug ip igmp filter

debug ip igmp filter
Use the debug ip igmp filter privileged EXEC command to debug IGMP filter events. Use the no form
of this command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(8)EA1
Usage Guidelines
The undebug ip igmp filter command is the same as the no debug ip igmp filter command.
Related Commands Command
show debugging
Catalyst 3550 Multilayer Switch Command Reference
B-16
debug ip igmp filter
no debug ip igmp filter
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Appendix B Debug Commands
78-11195-09