Switchport Broadcast - Cisco Catalyst 3550 Command Reference Manual

switchport broadcast

switchport broadcast
This is an obsolete command.
In past releases, the switchport broadcast interface configuration command was used to set the
broadcast suppression level on the interface. This command is replaced by the storm-control broadcast
interface configuration command.
Command History Release
12.1(4)EA1
12.1(8)EA1
Related Commands Command
show storm-control
storm-control
switchport multicast
switchport unicast
Catalyst 3550 Multilayer Switch Command Reference
2-460
Modification
This command was first introduced.
This command was replaced by the
Description
broadcast Displays broadcast suppression settings on an interface or on all
interfaces.
Sets broadcast, multicast, or unicast storm control on an interface
with the specified threshold level.
Obsolete command. Replaced by the storm-control multicast
interface configuration command.
Obsolete command. Replaced by the storm-control unicast
interface configuration command.
Chapter 2 Cisco IOS Commands
storm-control command.
78-11195-09