Cisco Catalyst 3550 Command Reference Manual page 365

Chapter 2 Cisco IOS Commands
In the preceding display, Status is defined as follows:
•
•
•
This is an example of output from the show mvr interface gigabitethernet 0/2 command:
Switch# show mvr interface gigabitethernet0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface gigabitethernet0/6 members command:
Switch# show mvr interface gigabitethernet0/6 members
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
78-11195-09
Active means the port is part of a VLAN
Up/Down means that the port is forwarding/nonforwarding
Inactive means that the port is not yet part of any VLAN.
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
Catalyst 3550 Multilayer Switch Command Reference
show mvr interface
2-339