Debug Mac-Manager - Cisco Catalyst 3550 Command Reference Manual

Appendix B Debug Commands

debug mac-manager

Use the debug mac-manager privileged EXEC command to debug the platform-specific MAC address
table manager software module. This command debugs the platform-specific part of learning MAC
addresses on VLANs and updating the hardware with the necessary information. Use the no form of this
command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines The undebug mac-manager command is the same as the no debug mac-manager command.
Related Commands Command
show debugging
78-11195-09
debug mac-manager
no debug mac-manager
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Catalyst 3550 Multilayer Switch Command Reference
debug mac-manager
B-21