Cisco Catalyst 3550 Command Reference Manual page 68

clear port-security
Examples
This example shows how to remove all secure addresses from the MAC address table:
Switch# clear port-security all
This example shows how to remove a configured secure address from the MAC address table:
Switch# clear port-security configured address 0008.0070.0007
This example shows how to remove all the dynamic secure addresses learned on a specific interface:
Switch# clear port-security dynamic interface gigabitethernet0/1
This example shows how to remove all the sticky secure addresses from the address table:
Switch# clear port-security sticky
You can verify that the information was deleted by entering the show port-security privileged EXEC
command.
Related Commands Command
show port-security
switchport port-security
Catalyst 3550 Multilayer Switch Command Reference
2-42
Description
Displays the port security settings for an interface or for the
switch.
Enables port security on an interface.
Chapter 2 Cisco IOS Commands
78-11195-09