Cisco Catalyst 3550 Command Reference Manual page 166

mac access-list extended
Examples
This example shows how to create a MAC named extended access list named mac1 and to enter extended
MAC access list configuration mode:
Switch(config)# mac access-list extended mac1
Switch(config-ext-macl)#
This example shows how to delete MAC named extended access list mac1:
Switch(config)# no mac access-list extended mac1
You can verify your settings by entering the show access-lists privileged EXEC command.
Related Commands Command
deny
permit
show access-lists
vlan access-map
Catalyst 3550 Multilayer Switch Command Reference
2-140
Description
Configures the MAC ACL (in extended MAC-access list configuration
mode).
Displays the access lists configured on the switch.
Defines a VLAN map and enters access-map configuration mode where you
can specify a MAC ACL to match and the action to be taken.
Chapter 2 Cisco IOS Commands
78-11195-09