Show Controllers Tcam - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show controllers tcam

Use the show controllers tcam privileged EXEC command to display the state of the registers for all
ternary content addressable memory (TCAM) in the system and for all TCAM interface
application-specific integrated circuits (ASICs) that are CAM controllers.
Syntax Description | begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show controllers tcam command:
Switch# show controllers tcam
CAM Controller 1:
Revision: 5A5A5A00, Control: 0000025F, Status: 00000000.
CAM 1:
78-11195-09
show controllers tcam [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Revision: 00 00000000 00B30101
Size: 00 00000000 00080040
Device ID: 00 00000000 00000000
Config: 00 00000000 88000002
ReplyID[0]: 00 00000000 00000000
ReplyID[1]: 00 00000000 00000000
ReplyID[2]: 00 00000000 00000000
ReplyID[3]: 00 00000000 00000000
Hit Result[0]: 00 00000000 00000000
Hit Result[1]: 00 00000000 00000000
Hit Result[2]: 00 00000000 00000000
Hit Result[3]: 00 00000000 00000000
Hit Result[4]: 00 00000000 00000000
Hit Result[5]: 00 00000000 00000000
Hit Result[6]: 00 00000000 00000000
Hit Result[7]: 00 E00004E8 40001A63
Global Mask[10]: FF FFFFFFFF FFFFFFFF
Global Mask[11]: FF FFFFFFFF FFFFFFFF
Global Mask[12]: FF FFFFFFFF FFFFFFFF
Catalyst 3550 Multilayer Switch Command Reference
show controllers tcam
2-249