Chapter 2
Cisco IOS Commands
dot1x multiple-hosts
This is an obsolete command.
In past releases, the dot1x multiple-hosts interface configuration command was used to allow multiple
hosts (clients) on an 802.1X-authorized port.
Command History
Release
12.1(8)EA1
12.1(14)EA1
Related Commands
Command
dot1x host-mode
show dot1x
78-11195-09
Modification
This command was first introduced.
The dot1x multiple-hosts interface configuration command was replaced by
the dot1x host-mode interface configuration command.
Description
Set the 802.1X host mode on an interface.
Displays 802.1X statistics, administrative status, and operational status for
the switch or for the specified interface.
Catalyst 3550 Multilayer Switch Command Reference
dot1x multiple-hosts
2-73