Cisco Catalyst 3550 Command Reference Manual page 482

switchport
You can verify the switchport status of an interface by entering the show running-config privileged
EXEC command.
Related Commands Command
show interfaces
show running-config
Catalyst 3550 Multilayer Switch Command Reference
2-456
Description
switchport Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
Displays the current operating configuration. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference
for Release 12.1 > Cisco IOS File Management Commands >
Configuration File Commands.
Chapter 2 Cisco IOS Commands
78-11195-09