Dot1X System-Auth-Control - Cisco Catalyst 3550 Command Reference Manual

dot1x system-auth-control

dot1x system-auth-control
Use the dot1x system-auth-control global configuration command to enable 802.1X globally. Use the
no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults 802.1X is disabled.
Command Modes
Global configuration
Command History Release
12.1(14)EA1
Usage Guidelines
You must enable authentication, authorization, and accounting (AAA) and specify the authentication
method list before enabling 802.1X globally. A method list describes the sequence and authentication
methods to be queried to authenticate a user.
Examples
This example shows how to enable 802.1X globally on a switch:
Switch(config)# dot1x system-auth-control
You can verify your settings by entering the show dot1x privileged EXEC command.
Related Commands Command
show dot1x
Catalyst 3550 Multilayer Switch Command Reference
2-80
dot1x system-auth-control
no dot1x system-auth-control
Modification
This command was first introduced.
Description
Displays 802.1X statistics, administrative status, and operational status for
the switch or for the specified interface.
Chapter 2 Cisco IOS Commands
78-11195-09