Cisco Catalyst 3550 Command Reference Manual page 261

Chapter 2 Cisco IOS Commands
This is an example of output when the show cluster command is entered on a member switch:
Switch1> show cluster
Member switch for cluster "hapuna"
This is an example of output when the show cluster command is entered on a member switch that is
configured as the standby command switch:
Switch> show cluster
Member switch for cluster "hapuna"
This is an example of output when the show cluster command is entered on the command switch that
has lost connectivity with member 1:
Switch> show cluster
Command switch for cluster "Ajang"
This is an example of output when the show cluster command is entered on a member switch that has
lost connectivity with the command switch:
Switch> show cluster
Member switch for cluster "hapuna"
Related Commands Command
cluster enable
show cluster candidates
show cluster members
78-11195-09
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Total number of members:
Status:
Time since last status change:
Redundancy:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Description
Enables a command-capable switch as the cluster command switch,
assigns a cluster name, and optionally assigns a member number to it.
Displays a list of candidate switches.
Displays information about the cluster members.
3
192.192.192.192
0000.0c07.ac14
8
80
3 (Standby command switch)
192.192.192.192
0000.0c07.ac14
8
80
7
1 members are unreachable
0 days, 0 hours, 5 minutes
Disabled
8
80
3
<UNKNOWN>
192.192.192.192
0000.0c07.ac14
8
80
Catalyst 3550 Multilayer Switch Command Reference
show cluster
2-235