Reset - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

reset

Use the reset boot loader command to perform a hard reset on the system. A hard reset is similar to

power-cycling the switch, clearing the processor, registers, and memory.

Syntax Description

This command has no arguments or keywords.

Command Modes

Command History

This example shows how to reset the system:

switch: reset

Are you sure you want to reset the system (y/n)?y

System resetting...

Related Commands

Catalyst 3550 Multilayer Switch Command Reference

Modification

This command was first introduced.

Loads and boots an executable image and enters the command-line interface.

Boot Loader Commands