Shutdown Vlan - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

shutdown vlan

Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
Syntax Description
vlan-id
Defaults
No default is defined.
Command Modes Global configuration
Command History Release
12.1(4)EA1
Usage Guidelines
The shutdown vlan command does not change the VLAN information in the VTP database. It shuts
down traffic locally, but the switch still advertises VTP information.
Examples
This example shows how to shutdown traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands Command
shutdown
(config-vlan mode)
vlan database
78-11195-09
shutdown vlan vlan-id
no shutdown vlan vlan-id
ID of the VLAN to be locally shut down. Valid IDs are from 2 to 1001. VLANs
defined as default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
Modification
This command was first introduced.
Description
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed by the
vlan vlan-id global configuration command).
Enters VLAN configuration mode.
Catalyst 3550 Multilayer Switch Command Reference
shutdown vlan
2-393