Cisco Catalyst 3550 Command Reference Manual page 293

Chapter 2 Cisco IOS Commands
This is an example of output from the show fm vlan-label command when there was not enough room
for an input access group in the hardware:
Switch# show fm vlan-label 1
Unloaded due to merge failure or lack of space:
InputAccessGroup
Input Features:
Interfaces or VLANs: Vl1
Priority:normal
Vlan Map:(none)
Access Group:bigone, 11 VMRs
Multicast Boundary:(none), 0 VMRs
Output Features:
Interfaces or VLANs:
Priority:low
Bridge Group Member:no
Vlan Map:(none)
Access Group:(none), 0 VMRs
This is an example of output from the show fm vlan-label command when there was not enough room
for the input access group or the output access group on the label. Note that the access groups were
configured on two different interfaces. Labels are assigned independently for input and output.
Switch# show fm vlan-label 1
Unloaded due to merge failure or lack of space:
InputAccessGroup OutputAccessGroup
Input Features:
Interfaces or VLANs: Vl1
Priority:normal
Vlan Map:(none)
Access Group:bigone, 11 VMRs
Multicast Boundary:(none), 0 VMRs
Output Features:
Interfaces or VLANs: Vl2
Priority:normal
Bridge Group Member:no
Vlan Map:(none)
Access Group:bigtwo, 11 VMRs
Related Commands Command
show fm interface
show fm vlan
78-11195-09
Description
Displays per-interface feature manager information.
Displays per-VLAN feature manager information.
Catalyst 3550 Multilayer Switch Command Reference
show fm
2-267