Cisco Catalyst 3550 Command Reference Manual page 562

wrr-queue cos-map
Examples
This example shows how to map CoS values 0 and 1 to queue 1, 2 and 3 to queue 2, 4 and 5 to queue 3,
6 and 7 to queue 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# wrr-queue cos-map 1 0 1
Switch(config-if)# wrr-queue cos-map 2 2 3
Switch(config-if)# wrr-queue cos-map 3 4 5
Switch(config-if)# wrr-queue cos-map 4 6 7
You can verify your settings by entering the show mls qos interface queueing privileged EXEC
command.
Related Commands Command
show mls qos interface
wrr-queue dscp-map
Catalyst 3550 Multilayer Switch Command Reference
2-536
Description
queueing Displays the queueing strategy (WRR, priority queueing), the
weights corresponding to the queues, and the
CoS-to-egress-queue map.
Maps DSCP values to the tail-drop or WRED thresholds of the
egress queues.
Chapter 2 Cisco IOS Commands
78-11195-09