Dot1X System-Auth-Control - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

dot1x system-auth-control

Use the dot1x system-auth-control global configuration command to globally enable 802.1x. Use the
no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults 802.1x is disabled.
Command Modes Global configuration
Command History Release
12.1(14)AX
Usage Guidelines You must enable authentication, authorization, and accounting (AAA) and specify the authentication
method list before globally enabling 802.1x. A method list describes the sequence and authentication
methods to be queried to authenticate a user.
Examples
This example shows how to globally enable 802.1x on a switch:
Switch(config)# dot1x system-auth-control
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command
dot1x port-control
show dot1x
interface-id]
OL-9645-10
dot1x system-auth-control
no dot1x system-auth-control
Modification
This command was introduced.
[interface
Description
Enables manual control of the authorization state of the port.
Displays 802.1x status for the specified port.
Catalyst 3750 Metro Switch Command Reference
dot1x system-auth-control
2-93