Port Poe Leds - Allied Telesis AT-GS920/16 Installation And User Manual

GS920 Series Gigabit Ehternet Switch Installation and User's Guide
Table 8. Port Status LEDs for Normal and Configuration Modes
Port LED
Mode
Position
Configuration
Mode
Lower LEDs
a. The Upper LED for each port is not used in the Configuration Mode.
b. When all of the Lower LEDs are blinking together in the Configuration Mode, then all of the Ethernet ports are
eligible to be configured at once. When only one of the Lower LEDs is blinking, then that port is eligible to be
individually configured.

Port POE LEDs

LED
a Port Select
The port PoE LEDs indicates the PoE status on ports individually. See
Table 9.
LED State
Green ON
Green Blinking
(Slow)
PoE
Green Blinking
(Fast)
OFF
State
Green Indicates the port is selected and
eligible to be configured with front
b
Blinking
panel DIP switches.
OFF Port is not selected.
Table 9. PoE LED
Description
The switch is providing power to
powered devices (PDs).
The switch does not have enough
power budget to provide power to
requesting PDs.
An error is detected.
The switch does not detect any PDs.
Description
26