What To Prepare For Wall Installation; Installing The Switch On A Wall - Allied Telesis AT-GS920/16 Installation And User Manual

What to Prepare
for Wall
Installation
Installing the
Switch on a Wall
You need the following items to install the switch on a wall:
Four AT-BRKT-J24 brackets

16 M4mm x 6mm screws to attach the brackets to the switch

(included in the AT-BRKT-J24 bracket kit)
Eight 4mm x 32mm wood screws to attach the unit to a wall

(not included)
Cross-head screwdriver

Pencil

Drill

Note
You must provide screws to attach the brackets to the switch, a
cross-head screwdriver, a pencil, and a drill.
To install the AT-GS920/8PS switch on a wall, perform the following
procedure:
1. Review "Selecting a Site for the Switch" on page 36 before performing
this procedure.
2. Attach each bracket to the switch using four screws as shown in Figure
40.
.
Figure 40. Attaching the Wall Brackets
GS920 Series Gigabit Ehternet Switch Installation and User's Guide
69