Allied Telesis AT-GS920/16 Installation And User Manual page 64

Chapter 3: Installing the AT-GS920/8PS Switch
64
Figure 32. Installing the AT-RKMT-J15 Tray in a n Equipment Rack
3. Turing the tray fixing screws on counterclockwise and pull out the tray.
You can draw the tray to a maximum of 250mm from the tray chassis.
Figure 33. Puling out the AT-RKMT-J15 Tray
4. Place a switch in the tray and secure the switch to the tray with the
head screws through the holes on the slide rail weld.
Note
You can install two AT-GS920/8PS switches. Install one switch at a
time.