Table of Contents
Advertisement
GS920 Series Gigabit Ehternet Switch Installation and User's Guide
Rack Installation
of AT-GS920/16
or AT-GS920/8
Note
The screws for an equipment rack are not included in the shipping
box.
Figure 23. Attaching the Switch to an Equipment Rack
7. Proceed to "Cabling the Switch" on page 57.
To install the AT-GS920/16 or AT-GS920/8 switch in an equipment rack
using the AT-RKMT-J05 or AT-RKMT-J08 rack mount kit respectively,
perform the following procedures:
Note
You must purchase theAT-RKMT-J05 or AT-RKMT-J08 rack mount
kit separately.
Unpacking the AT-RKMT-J05 or AT-RKMT-J08 Rack Mount Kit
To unpack the AT-RKMT-J05 or AT-RKMT-J08 rack mount kit, perform
the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all hardware components are included in your rack mount
package listed in Table 13 on page 39.
52
Advertisement
Table of Contents
