Wall Installation Of At-Gs920/16 Or At-Gs920/8 - Allied Telesis AT-GS920/16 Installation And User Manual

Wall Installation
of AT-GS920/16
or AT-GS920/8
This section explains the procedure for the installation either a
AT-GS910/16 switch or a AT-GS910/8 switch on a wall using the
AT-BRKT-J23 wall mount kit.
Note
You must purchase the AT-BRKT-J23 wall mount brackets
separately.
Unpacking the AT-BRKT-J23 Wall Mount Kit
To unpack the AT-BRKT-J23 wall mount kit, perform the following
procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that one pair of brackets is included in your wall mount package
listed in Table 13.
Table 17. Components in the AT-BRKT-J23 Wall Mount Kit
One pair of
brackets
3. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Chapter 2: Hardware Installation
Components
47