Table of Contents
Advertisement
Disabling Flow Control
Perform the following procedure to disable the Flooding feature:
1. Set DIP switch # 5 to the DOWN position to disable this feature. See
Figure 52.
Figure 52. DIP Switch Settings for Disabling Flow Control
2. Turn the power OFF by unplugging the AC power cord and then back
ON again by reconnecting it to the AC outlet on the switch. The new
configuration is now implemented and effective and the Flow Control
feature is disabled.
Note
A recently changed DIP switch setting becomes effective ONLY
after you turn the switch's AC power OFF and then back ON.
Chapter 4: Switch Configuration
83
Advertisement
Table of Contents
