Configuration Switches And Led Descriptions - Allied Telesis AT-GS920/16 Installation And User Manual

GS920 Series Gigabit Ehternet Switch Installation and User's Guide

Configuration Switches and LED Descriptions

The LEDs display status information when the switch is in a Normal
operating mode or in a Configuration mode.
The GS920 Series LEDs and configuration switches are located on the
front panel of the chassis. Refer to Figure 9 for their locations.
Figure 9. AT-GS920/8 Front Panel Configuration DIP Switches and LEDs
Note
The front panel Configuration switches and LED locations are
shown for the AT-GS920/8 switch. Similar switch and LED layouts
can also be found on the AT-GS920/24 and AT-GS920/16 front
panels.
The AT-GS920/8PS LEDs and configuration switches are shown in
Figure 10 for their locations. The AT-GS920/8PS switch has additional
LEDs and DIP switches for the PoE and port-isolation VLAN functions.
Figure 10. AT-GS920/8PS Configuration DIP Switches and LEDs
22