Table of Contents
Advertisement
GS920 Series Gigabit Ehternet Switch Installation and User's Guide
3. Have another person hold the switch with the brackets at the wall
location where the switch is to be installed. Use a pencil to mark the
wall with the locations of the four holes in the brackets. See Figure 58
as an example.
x
Figure 58. Marking the Screw Hole Locations
4. Pre-drill the marked locations on the wall at the locations marked in
Step 3.
5. Install the four plastic anchors into the wall in the holes drilled in
Step 4.
104
Advertisement
Table of Contents
