Table of Contents
Advertisement
GS920 Series Gigabit Ehternet Switch Installation and User's Guide
Unpacking the Switch
AT-GS920/24
Shipping
Contents
To unpack a GS920 Series switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. Allied Telesis
recommends that you use the original shipping material to return the
unit to Allied Telesis if required.
2. Place the switch on a level, secure surface.
3. Verify that the hardware components are included in your switch
package.
The contents of the AT-GS920/24 shipping box as shown in Table 12:
Table 12. AT-GS920/24 Shipping Box Contents
Description
AT-GS920/24
Switch
AC Power
cord
Rubber feet
(Set of 4)
Four mounting
screws
Illustration
38
Advertisement
Table of Contents
