Table of Contents
Advertisement
Table 19. EEE Support for Port Speed/Link Configuration
Supported Speed/Link
1000M Auto-Negotiation
100M Auto-Negotiation
Disabling EEE
Perform the following procedure to disable the EEE feature:
1. Set DIP switch # 2 to the DOWN position to disable this feature. See
Figure 46.
Figure 46. DIP Switch Settings for Disabling EEE
2. Turn the power OFF by unplugging the AC power cord and then back
ON again by reconnecting it to the AC outlet on the switch. The new
configuration is now implemented and effective and the EEE feature is
disabled.
Note
A recently changed DIP switch setting becomes effective ONLY
after you turn the switch's AC power OFF and then back ON.
Chapter 4: Switch Configuration
Unsupported Speed/Link
100M Full Duplex
100M Half Duplex
10M Full Duplex
10M Half Duplex
77
Advertisement
Table of Contents
