Chapter 3: Installing the AT-GS920/8PS Switch
Installing the AT-GS920/8PS Switch on a Wall
Guidelines
68
The AT-GS920/8PS switch can be mounted on a wall
Before installing the AT-GS920/8PS switch on a wall, review the following
guidelines:
If protective earthing is used as a safeguard, the instructions shall
require connection of the equipment protective earthing conductor
to the installation protective earthing conductor. For example, a
power cord is connected to a socket-outlet with earthing
connection.
Si la mise à la terre de protection est utilisée comme protection, les
instructions doivent exiger le raccordement du conducteur de
protection de l'équipement au conducteur de protection de
l'installation. Par exemple, un cordon d'alimentation est connecté à
une prise de courant avec mise à la terre.
The AT-GS920/8PS switch must be mounted on the wall in one of
the four orientations as shown in Figure 39.
Figure 39. Orientations of the AT-GS920/8PS Switch on a Wall